Shop

C&R Racing Check Valve with Fittings 164

Check Valve is designed to be used with our cool down machine. Insures directional water flow through the entire cooling system. 1 1/2" P/N 70-11000   Fittings Included: 1 - Jiffy-Tite #52108 1 - Jiffy-Tite #51108   *Please specify...

ARH Gen 5 COPO Headers - Used

American Racing Headers Gen 5 COPO Headers - Used for one racing season - Excellent shape $1600

ARH Gen 6 COPO Headers - Like New

American Racing Headers Gen 6 COPO Headers Like New, Dyno Time Only $2,200

Callies 5.750" Stroke Crankshaft - Used

Callies 5.750" Stroke Crankshaft 2575 BobWt *Rods need to be ordered narrower to fit crank *New in 2020, Approx 75 Runs

Callies Dragonslayer 4.000" 6 CTWT LS Crankshaft - Used

Callies Dragonslayer 4.000" Stroke Crankshaft About 50 Runs Out of a Stock 427ci Gen 6 COPO

Clevite Main Bearings #MS-2260V-1 (SRI Coated)

Coated Set of Clevite MS-2260V-1

Aeromotive A4 Carbureted Regulator #13203

ACDelco Water Outlet #15-1443 (#14084383)

Engine Coolant Water Outlet

Murray 16 PSI Radiator Cap #7016

Radiator Cap Manufactured to meet all original equipment manufacturer specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the...

Murray 7 PSI Radiator Cap #7007

Radiator Cap Manufactured to meet all original equipment manufacturer specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the...

Racing Power Clamp-On Open Filter Breather #R9309

1-1/2" Tube Size Without Shield Rubber Base with Steel Top Fits Covers with 1.25" Hole Chrome

Moroso Tire Cover #94421

Tire Cover, White, Vinyl, Suction Cup, for Tires up to 42 in. Wide and 36 in. Long, Moroso Logo

COMP Cams 3/8" Lash Caps #622-16 - New Old Stock

Lash Caps, Steel, 3/8 in. Valve Stem, .080 in. Thick, Set of 16

Jesel Cam Adapter SB Needle Bearing #KCA-39260

This adapter is manufactured from a heat treated tool steel and is silver in color. The cylinder block must be machined to run this adapter. The camshaft endplay can be run as tight at .001”. Cam tunnel must be machined 3.000”...

Jesel Timing Belt Drive Lower Pulley #KBD-35510

Jesel Lower Crank Pulley, Chevy Small Block

COMP Cams Custom Ground Camshaft #54-000-11 (218-917)

Camshaft, Custom Grind, Race Roller Tappet, Chevy, Small Block, LS1, 3 Bolt Core Specs: Adv Duration: 323 Int / 338 Exh Duration @ .050: 262 / 276 Valve Lift: .639 / .639  

COMP Cams Custom Ground Camshaft #54-000-11 (4690-15)

Camshaft, Custom Grind, Race Roller Tappet, Chevy, Small Block, LS1, 3 Bolt Core Specs: Adv Duration: 319 Int / 340 Exh Duration @ .050: 269 / 281 Valve Lift: .674 / .672

COMP Cams Custom Ground Camshaft #54-000-11 (9711-15)

Camshaft, Custom Grind, Race Roller Tappet, Chevy, Small Block, LS1, 3 Bolt Core Specs: Adv Duration: 329 Int / 342 Exh Duration @ .050: 268 / 280 Valve Lift: .674 / .674

ARP Head Studs #247-4201

Cylinder Head Studs, Pro Series, 12-Point Heads, Dodge, 8.0L, V-10, Kit

COMP Cams Valve Lash Caps #619-16

Lash Caps, Steel, 5/16 in. Valve Stem, .080 in. Thick, 426 Hemi, Short Cap, Set of 16

COMP Cams Valve Spring Locators #4700-16

Valve Spring Locator, Outside Locating Shoulder, Steel, 0.060 in. Thick, 1.670 in. O.D., 0.640 in. I.D., 1.565 in. Spring O.D., Set of 16

Crane Cams Valve Stem Seal #99826-16

Valve Stem Seals, PTFE, Positive Stop, .500 in. Guide, 11/32 in. Valve Stem, Set of 16

Crane Cams Valve Stem Seal #99828-16

Valve Stem Seals, PTFE, Positive Stop, .500 in. Guide, 3/8 in. Valve Stem, Set of 16

Crane Cams Valve Stem Seal #99824-16

Valve Stem Seals, PTFE, Positive Stop, .531 in. Guide, 5/16 in. Valve Stem, Set of 16