Electronics

Does not include roll bar mount. LED bulbs.

Auto Meter Amber Lens Shift Light

Auto Meter Amber Lens Shift Light with Cap

Auto Meter Shift Light with Amber Bulbs. Includes a bolted-on bracket.

Exhaust Pressure 0-75 Psi Sensor Module These pre-programmed analog function module and sensor combinations are ready for plug-and-play installation on the V-Net cable. (Note: All pressure and vacuum modules have a 48” pigtail cable between the...

Pre-programmed Brake Pressure Sensor Vnet Module For a function to be monitored on the V-Net the signal from that function must pass through two components, a sensor and a module. The sensor is the unit that actually measures the input from the function...

Pre-programmed Carburetor Fuel 0-15 psi Sensor Vnet Module For a function to be monitored on the V-Net the signal from that function must pass through two components, a sensor and a module. The sensor is the unit that actually measures the input from...

Pre-programmed Manifold Boost, 0-75 psi Sensor Vnet Module For a function to be monitored on the V-Net the signal from that function must pass through two components, a sensor and a module. The sensor is the unit that actually measures the input from...

Pre-programmed Manifold Vacuum 30-0-30 Sensor Vnet Module For a function to be monitored on the V-Net the signal from that function must pass through two components, a sensor and a module. The sensor is the unit that actually measures the input from the...

Racepak Pre-programmed Oil Pressure Sensors 0-150 psi with Vnet Module For a function to be monitored on the V-Net the signal from that function must pass through two components, a sensor and a module. The sensor is the unit that actually measures the...

V-Net Module with Sensor, Oil Pressure, 0-300 psi This pre-programmed analog function module and sensor combinations are ready for plug-and-play installation on the V-Net cable.

Transmission Pressure Sensor

The Shift Light Module allows you to use any LED-style light (300 milliamp maximum) as a fully-programmable, stand-alone shift light. By accessing the engine RPM off of the V-Net you can program up to six separate shift alarm signals. Each...

The V500SD data recorder is the most common recorder for Pro Stock, Pro Modified and many of the Sportsman classes. In its base configuration, the V500SD monitors six parameters (Engine RPM, Driveshaft RPM, Accel G, Lateral G, Battery Volts and a 12-volt...

Pan (Crankcase) Vacuum 0-30 In hg pre-programmed These pre-programmed analog function module and sensor combinations are ready for plug-and-play installation on the V-Net cable. (Note: All pressure and vacuum modules have a 48” pigtail cable...

Pre-programmed Exhaust Pressure 0-75 Psi Sensor Vnet Module For a function to be monitored on the V-Net the signal from that function must pass through two components, a sensor and a module. The sensor is the unit that actually measures the input from...

Wheelie Bar Pressure, Left 0-3000 psi pre-programmed These pre-programmed analog function module and sensor combinations are ready for plug-and-play installation on the V-Net cable. (Note: All pressure and vacuum modules have a 48” pigtail cable...

Wheelie Bar Pressure, Left 0-5000 psi pre-programmed These pre-programmed analog function module and sensor combinations are ready for plug-and-play installation on the V-Net cable. (Note: All pressure and vacuum modules have a 48” pigtail cable...