Data Recorder Systems

CD-1 Pro Capacitive Discharge Ignition System without data logging capability (includes P/N 104001 CD-1 Pro ignition module, P/N 102002 CD-1 ignition coil, harness, and USB interface). Intended for professional racing applications where the rules do not...

WEGO III Dual Channel Wide-band Exhaust Gas Oxygen Sensor System (includes WEGO III dual display unit, two Bosch LSU 4.2 oxygen sensor, 96" sensor harness, two 18 x 1.5 mm weld nuts for exhaust pipe, and software on CDROM)

WEGO III Dual Channel Wide-band Exhaust Gas Oxygen Sensor System with Lambda Display(includes WEGO III dual display unit, two Bosch LSU 4.2 oxygen sensor, 96" sensor harness, two 18 x 1.5 mm weld nuts for exhaust pipe, and software on CDROM)

WEGO III Wide-band Exhaust Gas Oxygen Sensor System (includes WEGO III unit with 96" extended length harness for automotive applications, Bosch LSU 4.2 oxygen sensor, 18 x 1.5 mm weld nut for exhaust pipe, and software on CDROM)

Exhaust Pressure 0-75 Psi Sensor Module These pre-programmed analog function module and sensor combinations are ready for plug-and-play installation on the V-Net cable. (Note: All pressure and vacuum modules have a 48” pigtail cable between the...

Pre-programmed Brake Pressure Sensor Vnet Module For a function to be monitored on the V-Net the signal from that function must pass through two components, a sensor and a module. The sensor is the unit that actually measures the input from the function...

Pre-programmed Carburetor Fuel 0-15 psi Sensor Vnet Module For a function to be monitored on the V-Net the signal from that function must pass through two components, a sensor and a module. The sensor is the unit that actually measures the input from...

Pre-programmed Manifold Boost, 0-75 psi Sensor Vnet Module For a function to be monitored on the V-Net the signal from that function must pass through two components, a sensor and a module. The sensor is the unit that actually measures the input from...

Pre-programmed Manifold Vacuum 30-0-30 Sensor Vnet Module For a function to be monitored on the V-Net the signal from that function must pass through two components, a sensor and a module. The sensor is the unit that actually measures the input from the...

Racepak Pre-programmed Oil Pressure Sensors 0-150 psi with Vnet Module For a function to be monitored on the V-Net the signal from that function must pass through two components, a sensor and a module. The sensor is the unit that actually measures the...

V-Net Module with Sensor, Oil Pressure, 0-300 psi This pre-programmed analog function module and sensor combinations are ready for plug-and-play installation on the V-Net cable.

Transmission Pressure Sensor

This model comes standard with all the basic instrumentation needed to operate your vehicle. Standard features include engine rpm, water temperature, oil pressure and battery voltage. You can optionally add oil temperature and fuel pressure by simply...

The Shift Light Module allows you to use any LED-style light (300 milliamp maximum) as a fully-programmable, stand-alone shift light. By accessing the engine RPM off of the V-Net you can program up to six separate shift alarm signals. Each...

The V500SD data recorder is the most common recorder for Pro Stock, Pro Modified and many of the Sportsman classes. In its base configuration, the V500SD monitors six parameters (Engine RPM, Driveshaft RPM, Accel G, Lateral G, Battery Volts and a 12-volt...

Pan (Crankcase) Vacuum 0-30 In hg pre-programmed These pre-programmed analog function module and sensor combinations are ready for plug-and-play installation on the V-Net cable. (Note: All pressure and vacuum modules have a 48” pigtail cable...

Transmission Pressure, 0-300 psi pre-programmed These pre-programmed analog function module and sensor combinations are ready for plug-and-play installation on the V-Net cable. (Note: All pressure and vacuum modules have a 48” pigtail cable...

Pre-programmed Exhaust Pressure 0-75 Psi Sensor Vnet Module For a function to be monitored on the V-Net the signal from that function must pass through two components, a sensor and a module. The sensor is the unit that actually measures the input from...